| |
|
E10-Relay+ |
E10-npn+ |
| 1. |
Power Supply
|
- 24V
AC (transformer) or 24VDC
- Current = 0.2A
-
Rectified DC24V availale for
sensor. |
- DC 12 to
24V (+ 10% ripple)
- Current 0.5~2A (load dependent) |
| 2. |
CPU
Program Storage Size
Average Execution Speed |
216 steps stored in EEPROM
20µs per step |
216 steps stored in EEPROM
20µs per step |
| 3. |
Serial
Interface |
- 1 x TTL signal
- 1 x RS485
port
- Slave only mode.
- Need Opto232
adapter to
connect to PC. |
- 1 x RS232 or RS485 port
- Jumper selectable
- Slave only mode.
- Direct connection to PC |
| 4. |
Input Circuits
Number of inputs
Input Voltage
for Logic 0
Input Voltage for Logic 1 |
6 (PNP type)
open circuit or 0 to 3.5V DC
8 to 24V DC |
6 (NPN type)
open circuit or 8.5V to 24V
0V to +3.5V DC |
| 5. |
Output Circuits
Number of outputs
Peak output
current
Output Voltage for Logic 1
Inductive back EMF
protection |
4
2.0A @ 250VAC or 24VDC
per output Dry contact
---- No---- |
4
Sink 1.0A per output
1.2V @ Iout = 500mA
-----yes---- |
| 6. |
Dimension |
7.8cm (L) x 5.6cm (W) x 2.5cm(H) |
5.4cm (L) x 5.4cm (W) x 2.0cm(H) |
| 7. |
Weight (approximate) |
75g |
35g |
